manualshive.com logo in svg

Black Box ET0010A, Руководство пользователя CLI, Страница: 197 / 212

Поделиться
Скачать
Black Box ET0010A Скачать руководство пользователя страница 197

Command Reference

198

ETEP CLI User Guide

update-filesystem

Description

The 

update-filesystem

 command downloads a new file system from an FTP server to the ETEP. This 

command performs a software upgrade, and merges the current appliance configuration with the upgraded 
file system upon reboot. This preserves the appliance configuration including the management IP address, 
passwords, and other settings. 

In addition to loading new software on an appliance, the 

update-filesystem

 command preserves a backup 

copy of the old file system and configuration. 

User Type

Administrator 

Hierarchy Level

Command mode

Syntax

update-filesystem {<ftpIP> <ftpPath> <ftpUser> <ftpPassword>} [<ftpSecure>] 

Attributes

ftpIP - 

IP address of the FTP host. The command accepts IPv4 and IPv6 addresses.

ftpPath - 

The path and directory name of the software image on the FTP server. Enter the directory 

listing relative to the root FTP directory; do not enter the entire path. 

ftpUser - 

User ID of a user on an FTP host.

ftpPassword - 

FTP user’s password.

ftpSecure - [ftp | sftp]

Defines the file transfer protocol. The default value is FTP, in which files are transferred unencrypted. 
SFTP secures the file transfer with SSH encryption.

Usage Guidelines

Do not use the following invalid characters in the FTP user name or password: @ : ? # < > &

This command requires a reboot to take effect. Rebooting immediately after an upgrade is strongly 
recommended. Any changes that are made between the upgrade and subsequent reboot will be lost when 
the appliance reboots. This includes changes to policies and keys (including scheduled rekeys), 
certificates, and appliance configuration.

The software prevents simultaneous upgrades on an appliance. Once an upgrade is complete, but prior to 
reboot, the software prevents another upgrade until a reboot is issued.

Example

The following example loads a new file system from FTP host 192.168.1.124 to the ETEP using SFTP as 
the file transfer protocol.

Содержание ET0010A





















































































































































































































Отзывы:

Нет отзывов