Black Box ET0010A, Руководство пользователя CLI

Страница: 13 / 212

Getting Started
14 ETEP CLI User Guide
Logging in through a Serial Link
Initial setup is performed through a serial link to the RS-232 port.
To log in to the CLI via a serial link:
1 Connect the RS-232 serial port directly to a PC or workstation, as described in Chapter 2 .
2 Open a terminal session through a VT-100 terminal emulation program such as HyperTerminal. Enter
the connection name, the appropriate serial port (usually COM1 or COM2), and the following serial
port parameters:
3 In the terminal session window, press ENTER. The login prompt displays.
Linux 2.6.16.17 on mips
pep login:
4 At the login prompt, type the user name and press ENTER. User names and passwords are case-
sensitive. See “Default User Names and Passwords” on page 13 for a list of default account settings.
5 At the password prompt, type your password and press ENTER.
6 When you are successfully logged in, the command line prompt displays as shown below (password
text is not displayed).
pep login: admin
Password:
Last login: Tue Jan 29 19:18:59 2008 on ttyS0
Welcome admin it is Tue Jan 29 19:37:12 UTC 2008
admin>
CLI Usage Tips
The commands that are described in this manual are presented using the following format conventions.
●
Arguments are shown in
monospaced
type, and must be entered exactly as they appear in the text.
●
Brackets [ ] indicate that the enclosed parameter is optional.
●
Braces { } indicate that the enclosed arguments or parameters are required.
●
Arguments separated by the vertical bar | indicate that any one of the arguments may be used. For
example, a | b means enter a or b, but not both.
●
Parameters that a user needs to enter are enclosed in angle brackets < >. For example, <ipAddress>
indicates that the user needs to enter an IP address, such as 192.168.1.1.
●
Commands, arguments and parameters are not case-sensitive. For example, show , SHOW , and Show
are all accepted as the same command.
Baud Speed 38,400
Parity None
Data Bits 8
Stop Bits 1
Flow Control None