manualshive.com logo in svg

Black Box ET0010A, Руководство пользователя CLI, Страница: 161 / 212

Поделиться
Скачать
Black Box ET0010A Скачать руководство пользователя страница 161

Command Reference

162

ETEP CLI User Guide

Hierarchy Level

Network-tools mode (admin > network-tools)

Syntax

ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline] [-p pattern] [-s 
packetsize] [-t ttl] [-I interface or address] [-M mtu discovery hint] [-S 
sndbuf] [-T timestamp option] [-Q tos] [hop1 ...] destination

Attributes

-L - 

Suppress loopback of multicast packets. 

-R - 

Record route.

-U - 

Print full user-to-user latency.

-b - 

Allow pinging a broadcast address.

-d - 

Set the SO_DEBUG option on the socket being used.

-f - 

Flood ping. 

-n - 

Show network addresses as numeric output only. 

-q - 

Quiet output.

-r - 

Bypass the normal routing tables and send directly to a host on an attached interface.

-v - 

Verbose output.

-V - 

Show version.

-a - 

Audible ping.

-A - 

Adaptive ping.

-c count - 

Stop after sending count ECHO_REQUEST packets. With deadline option, ping waits for 

count ECHO_REPLY packets, until the timeout expires.

-i interval - 

Wait interval seconds between sending each packet.

-w deadline - 

Specify a timeout, in seconds, before ping exits regardless of how many packets have 

been sent or received.

-p pattern - 

You may specify up to 16 “pad” bytes to fill out the packet that you send.

-s packetsize - 

Specifies the number of data bytes to be sent. 

-t ttl - 

Set the IP Time to Live. 

-I address - 

Set the source address to a specified interface address.

-M hint - 

Select Path MTU Discovery strategy. hint may be “do” (prohibit fragmentation), “want” (do 

PMTU discovery and fragment locally when packet is large), or “dont” (do not set DF flag).

-S sndbuf - 

Set socket sndbuf.

Содержание ET0010A





















































































































































































































Отзывы:

Нет отзывов