Black Box ET0010A, Руководство пользователя CLI

Страница: 12 / 212

Logging in to the Command Line Interface
ETEP CLI User Guide 13
Default User Names and Passwords
The ETEP has two roles: Administrator and Ops.
●
The Administrator manages users, configures the appliance, and creates and deploys policies.
●
The Ops user has access to a limited set of commands for initial appliance configuration, status
reporting and diagnostics.
When first installing the ETEP, use the default Administrator password to log in, as shown in Table 1 . It
is strongly recommended that the Administrator change the default passwords before putting the ETEP
into operation in the network.
Related topics:
●
“Overview” on page 17
●
“Assigning Passwords” on page 26
Prerequisites
Make sure that the following installation tasks are complete before configuring the ETEP:
●
Install the required user-supplied software on the management workstation, as described in the
Installation Guide
●
Make sure that the firewalls in your system are configured to allow for the protocols required for your
deployment, as listed in the
Installation Guide.
●
Attach the network cables and power cord
●
Power up the appliance and verify that the unit is operational
For more information about installing your ETEP, refer to the ETEP Installation Guide .
Logging in to the Command Line Interface
To manage the ETEP using the CLI, you can attach a PC directly to the serial port or use any SSH client
for a secure remote connection through the Ethernet management port. Initial setup is performed through
the serial port.
Table 1 Default user names and passwords on the ETEP
Role Default user name Default password
Administrator admin admin
Ops ops ops