Black Box ET0010A, Руководство пользователя CLI

Страница: 73 / 212

Creating Policies
74 ETEP CLI User Guide
Managing Local Site Policies
This section describes how to manage the local-site policies on the ETEP. Tasks include:
●
“Modifying a Local Site Policy” on page 74
●
“Deleting a Local Site Policy” on page 74
●
“Restoring the Local Site Policy Set” on page 75
Modifying a Local Site Policy
You can modify a policy by entering policy-config mode using the name of the policy that you want to
change, and issuing the relevant commands with new settings.
It’s a good idea to make a backup copy of the active policies prior to making any changes. It’s also good
practice to issue the
show-policy-set command to review the pending changes prior to deployment.
Related topics:
●
“Viewing the Local Site Policy Set” on page 72
●
“Making a Backup Copy of the Local Site Policy Set” on page 73
●
“Deploying Management Policies” on page 92
Deleting a Local Site Policy
To delete a local-site policy, first issue the policy-delete command using the policy name that you want
to remove, and then deploy the policy set. The targeted policy continues to run on the ETEP until the
policy set is deployed.
You may want to create a backup copy of the active policies prior to making any changes to the policy
set.
To delete a policy:
1 From the
local-site-policy>
prompt, enter the policy-delete command for the policy that you
wish to delete.
policy-delete <name>
2 Deploy the policy set for the changes to take effect on the ETEP.
deploy-policy-set
Related topics:
●
“Viewing the Local Site Policy Set” on page 72
●
“Deploying Management Policies” on page 92
Clearing the Local Site Policy Set
The clear-policy-set command clears the specified local-site policy files, returning them to the factory
state.
Clearing the current policies removes all active policies that are running on the ETEP, pending policies,
and the backup copy of the policy set.