Black Box ET0010A, Руководство пользователя CLI

Страница: 25 / 212

User Administration
26 ETEP CLI User Guide
Viewing a List of Users
Two show commands provide information about ETEP users.
From command mode, the
show running-config command lists the users currently logged in to the
ETEP.
In user-config mode, the
show command provides a summary of ETEP users. It displays the password
enforcement policy that is in force on the ETEP, along with user configurations. Passwords are not
displayed.
Accounts that have been disabled are indicated with an asterisk next to the user name. In Figure 2 , the
tech1 account is flagged as disabled. The asterisk indicates one of the following:
●
A new account that does not yet have a password assigned
●
An existing account that the Administrator manually disabled.
Accounts that are disabled because of a login failure are not flagged in the show command output.
Example
user-config> show
Figure 2 user-config show command output
Assigning Passwords
The Administrator has the ability to assign passwords to users, as part of establishing a user account or as
a maintenance task. All users can modify their own passwords.
If you are using a Common Access Card (CAC) to provide user authorization in addition to certificate-
based authentication in an EncrypTight deployment, password use is optional. Users without assigned
passwords can access the ETEP through the EncrypTight software. Passwords are still required for CLI
access.
●
“Assigning Passwords to Users” on page 27
●
“Changing Your Own Password” on page 28