Black Box Compact T1 MT850A, Руководство пользователя

Страница: 193 / 592

Compact T1 - Release 6.1 5-109
CLI Commands
set
set (router) mgcp algorithmname
The set (router) mgcp algorithmname is an interoperability command to configure non-
default MGCP designations for voice coding algorithms supported by the CMG. MGCP
algorithm names are used in the "a:" attribute in the Local Connection Options (L:)
parameter line of a CRCX or MDCX command. The CMG will ignore the case of
characters in algorithm names received in MGCP commands from a call agent. Default
algorithm names are taken or derived from standard encoding names registered at IANA,
as specified at www.iana.org, the RTP section. This command takes effect immediately and
applies to the CMG Router card only.
The default MGCP algorithm names are given in column 2 below.
NOTE:
The G.729 feature is protected by a software key. Until an appropriate
key is entered to enable this feature it will not be usable. The command, however,
will still succeed to allow for pre-configuration. For additional information on how to
purchase this feature, contact Customer Service.
Syntax:
set {cmg_card-addr} mgcp algorithmname {setting}
{"algorithm-name"}
Example:
set 1 mgcp algorithmname g711mu "Gxxx"
The example will set the mgcp algorithm coding to G.711 for mu-law and name
it "Gxxx", for the CMG card in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{setting}
Enter one of the following: g711mu, g711a, g726_16, g726_24, g726_32, g726_40, g729a.
{"algorithm-name"}
The MGCP algorithm name for the CMG card. This name must be enclosed in quotes, with
a maximum of 16 characters.
Algorithm CMG Algorithm ID MGCP Algorithm Name
g711 mu-law g711mu PCMU
g711 A-law g711a PCMA
g729A g729a G729A
g726-16 kb/s g726_16 g726-16
g726-24 kb/s g726_24 g726-24
g726-32 kb/s g726_32 g726-32
g726-40 kb/s g726_40 g726-40