Biotek Synergy HTX, Руководство оператора

Страница: 6 / 184

iv
|
Preface
5: Select an Appropriate Location ....................................... 13
6: Connect the Power Supply............................................. 14
7: Unpack and Inspect the Dispense Module ........................ 15
8: Install the Dispense Module ........................................... 18
Record Syringe Calibration Values .................................. 18
Install the Dispenser .................................................... 18
9: Connect the Host Computer .......................................... 20
10: Install Gen5 Software ................................................. 20
11: Turn on the Reader .................................................... 20
12: Establish Communication ............................................ 21
13: Set the Dispenser Calibration Values ............................. 22
14: Run a System Test ..................................................... 23
15: Test the Injector System ............................................. 24
Operational/Performance Qualification ................................ 26
Repackaging and Shipping Instructions ............................... 26
Getting Started ................................................................... 31
Key Components ............................................................. 32
Power Switch, Carrier Eject Button, Microplate Carrier ...... 32
Lamp Assembly and Filter Wheel Access ......................... 33
Excitation and Emission Filter Wheels ............................. 34
Installing the Time-Resolved Fluorescence Cartridge ........ 37
Configuring the System for Luminescence Measurements .. 38
The External Dispense Module ....................................... 39
Gen5 Software ................................................................ 41
Viewing/Updating the Filter and Wavelengths Tables ........ 42
Creating Protocols and Experiments ............................... 43
Controlling the Dispense Module .................................... 45
Recommendations for Optimum Performance ....................... 48
Incubation and Partial Plates ......................................... 49
Preventive Maintenance ..................................................... 51
Recommended Maintenance Schedule ................................. 52
Overview ................................................................... 52
Daily Cleaning for the Dispense Module .......................... 52
Recommended Maintenance Schedule ............................ 53
Warnings and Precautions ................................................. 54
Cleaning Exposed Surfaces ................................................ 55
Inspect/Clean Excitation and Emission Filters ....................... 56
Flush/Purge the Fluid Path ................................................ 57
Running a Dispense Protocol (Optional) .............................. 58
Empty/Clean the Tip Priming Trough .................................. 59
Clean the Priming Plate ..................................................... 59
Clean the Internal Components .......................................... 60
BioTek Instruments, Inc.