20
11. Select the speed out with
(1= Min and 9 = Max)
12. Press
or
to con
fi
rm selections
13. Position the tip to aspirate and press the START button
. The display
shows PRE OUT and arrow down to indicate the reset function.
14. Position the tip to discard priming excess and press the
start
button
15. Position the tip to dispense and press the START button
. Repeat
until the cycle is complete.
16. Finally position the tip to discard any remaining excess and press the
START button twice
.
Note:
It is also possible to continue to aspirate and dispense the same
volumes without the empty function. To continue, keep the START button
pressed during the last dispensing and within one second the direction
arrow will change. Keeping the START button depressed, place the tip
into the liquid again and then release the START button to aspirate the next
sample.
8.4. Multi-aspirating (SA)
The pipette performs consecutive aspiration operations of the programmed
volume. This mode allows e.g. emptying a microwell plate, sample pooling
and other special applications.
1. Press to display MULTI
2. Scroll
with until the symbol SA is displayed.
3. Con
fi
rm by pressing
4. Select the desired aspirating volume by using
Note:
When holding down
the volume display starts to scroll faster.
5. Press
or
to con
fi
rm the selection
6. Select the desired number of aspirations with
7. Press to con
fi
rm selection and to display the speed in or press
and continue from Step 12.
8. Select the speed in with
(1= Min and 9 = Max)
9. Press
or
to con
fi
rm selection and to display the speed out
10. Select the speed out with
(1= Min and 9 = Max)
11. Press
or
to con
fi
rm selections
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
