12
6.2. Speed adjustment
There are 9 speeds available for both dispensing and aspiration. The speed
is indicated in the bottom left hand corner of the display. The default speed
is 5 for all operating modes.
Speed can be adjusted during the programming by completing the setting
changes with the select key. In every operating mode the speed adjustment is
the last programming step. After adjusting the “speed out” the programming
is completed with enter or select key and the pipette is then ready for
operation.
Note:
The P
MANUAL
mode includes 5 different dispensing and aspirating
speeds.
7. PIPET MODES
The mode range PIPET includes 5 different operating modes.
Symbol Description
P
Pipetting with automatic blow-out
rP
Reverse pipetting without blow-out
P + MIXING
Pipetting with blow-out followed with mixing function
P COUNT
Pipetting with blow-out and displayed cycle counter
P MANUAL
Manual pipetting with on-line volume display
7.1. Pipetting mode (P) and pipetting with mixing (P+MIXING)
In pipetting mode (P) the
e
LINE performs pipetting with blow-out. In pipetting
with mixing mode (P
+MIXING
) pipetting is followed by a mixing function.
1. Press
to display PIPET
2. Scroll with
until the symbol P or P+MIXING is displayed.
3. Con
fi
rm by pressing
4. Select the desired pipetting volume by using the
Note:
When holding down the
the volume display starts to scroll faster.
5. Press
to con
fi
rm selection and to display the speed in or press
and continue from Step 10.
6. Select the speed in with
(1= Min and 9 = Max)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
