15
▲
▼
8. Select the speed in with
(1= Min and 9 = Max)
9. Press or
to con
fi
rm selection and to display the speed out
10. Select the speed out with
(1= Min and 9 = Max)
11. Press
or
to con
fi
rm selections
12. Position the tip to aspirate and press the START button
13. Position the tip to dispense and press the START button
. The tip is
emptied with blow-out and the piston returns automatically back to the
home position. The pipette is ready for next pipetting.
Step 12 Step 13
Note:
To change the cycle number or to reset the counter during the pipetting,
press the
to display the desired cycle number and con
fi
rm with
.
7.4. Manual pipetting (P MANUAL)
(Not available in multichannel models)
In the manual pipetting mode the aspiration and dispensing are controlled
manually. The aspiration or dispensing continues as long as the START
button is held down (within the selected volume range). The aspiration/
dispensing direction can be changed during pipetting by using the arrow key.
In the manual pipetting mode the display always shows the actual amount
of sample in the tip.
1. Press
to display PIPET
2. Scroll
with until the symbol P MANUAL is displayed.
3. Con
fi
rm by pressing
4. Select the desired pipetting volume by using
Note:
When holding down
the volume display starts to scroll faster.
5. Press to con
fi
rm selection and to display the speed in
or
press or continue from Step 10.
6. Select the speed in with
(1= Min and 5 = Max)
7. Press
or
to con
fi
rm selection and to display the speed out
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
