How do I route IP traffic over X.25 with MPX25?
127
User’s Guide: Version 1.2
Enabled Protocols
<X>IP
Encapsulation
<one of: ip_rfc877|ip|mpr>
X.25 Destination Address
<MPX25 partner’s X.25 address>
Next, edit the protocol-relevant settings for this partner. In our exam-
ple, we’re routing IP over X.25 so we need to set the remote partner’s
IP address here.
So under
set.
IP Transit Network
yes
Local ISDN IP Address
<V!CAS’ IP address>
Partner’s ISDN IP Address
<MPX25 partner’s IP address>
Partner’s LAN IP Address
<optional>
Partner’s LAN Netmask
<optional>
More Info
Depending on how you’ve set up X.25 routing, you can test your X.25
configurations using minipad. See minipad on page 160.
Note:
Only if an X.31 in D-channel link is being used as the trans-
port medium, the X.25 address entered here should be pre-
ceded by {00}. This will allow outgoing calls to be placed
correctly (using: 00<country code><area code><local number>)
and incoming calls to be identified (the X.25 network deliv-
ers calls without the preceding 00).
!
IP
?
