Binder KBF 115 (E5.2) Скачать руководство пользователя | Manualshive

Страница: 9 / 103

background image

KBF / KBF P (E5.2) 02/2012

page 9/103

Dear customer,

For the correct operation of the climatic chamber KBF / KBF P, it is important that you read this operating

manual completely and carefully and observe all instructions as indicated. Failure to read, understand and

follow the instructions may result in personal injury. It can also lead to damage to the unit and/or poor

equipment performance.

1.

Safety

This operating manual is part of the components of delivery. Always keep it handy for reference. The de-

vice should only be operated by laboratory personnel especially trained for this purpose and familiar with

all precautionary measures required for working in a laboratory. To avoid injuries and damage observe the

safety instructions of the operating manual.

WARNING

Failure to observe the safety instructions.
Serious injuries and unit damage.



Observe the safety instructions in this operating manual.



Carefully read the complete operating instructions of the climatic chamber KBF / KBF P.

1.1 Legal considerations

This operating manual is for informational purposes only. It contains information for installing, start-up,

operation and maintenance of the product. Note: the contents and the product described are subject to

change without notice.
Understanding and observing the instructions in this operating manual are prerequisites for hazard-free

use and safety during operation and maintenance. In no event shall BINDER be held liable for any dam-

ages, direct or incidental arising out of or related to the use of this manual.
This operating manual cannot cover all conceivable applications. If you would like additional information,

or if special problems arise that are not sufficiently addressed in this manual, please ask your dealer or

contact us directly by phone at the number located on page one of this manual
Furthermore, we emphasize that the contents of this operating manual are not part of an earlier or existing

agreement, description, or legal relationship, nor do they modify such a relationship. All obligations on the

part of BINDER derive from the respective purchase contract, which also contains the entire and exclu-

sively valid statement of warranty administration. The statements in this manual neither augment nor re-

strict the contractual warranty provisions.

1.2 Structure of the safety instructions

In this operating manual, the following safety definitions and symbols indicate dangerous situations follow-

ing the harmonization of ISO 3864-2 and ANSI Z535.6.

1.2.1 Signal word panel

Depending on the probability of serious consequences, potential dangers are identified with a signal word,

the corresponding safety color, and if appropriate, the safety alert symbol.

DANGER

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious

(irreversible) injury.

«
...
7
8
9
10
11
...
»

Содержание KBF 115 (E5.2)








































































































Отзывы:

Нет отзывов

Похожие инструкции для KBF 115 (E5.2)

Бренд: France Air Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды