Binder KBF 115 (E5.2) Скачать руководство пользователя страница 38

Страница: 38 / 103

KBF / KBF P (E5.2) 02/2012

page 38/103

6.4 Menu settings in the “User Level” menu

User Level

Date and time

Summer time

Language

Temperature unit

Buzzer
Safety controller

User-code No.

English

°C

Active

Date and time

Enter the actual date and time to provide the proper measurement records.

Data is displayed in the chart recorder function (chap. 7) of the controller and

will remain stored in case of a power failure.

Summer time

Time is set one hour in advance during the summer time period.
Setting the summer time switch:

•

Off:

No change to summer time occurs

•

User timed:

Beginning and end of summer time can be set individually

•

Automatic:

The summer time arrangement for central Europe is enabled

(summer time from last Sunday of March until last Sunday of October)

Language

Select the menu language as German, English, or French (chap. 6.1).

Temperature unit

Do NOT change the temperature unit from °C to °F.

Buzzer

Audible alarm buzzer

Inactive:

No audible alarm will sound if an alarm event happens (chap. 11).

Active:

An audible alarm will sound in case of an alarm event (chap. 11).

Safety controller

Enter a safety controller tolerance limit to prevent temperature from exceeding

this setting. For setting, see chap. 10.2.

User-Code No.

Change the password (“user code”) needed to access the menu “User level”.

Factory default s00001.

Keep in mind any modification of the user password. There is no

access to this menu without the correct password.

Содержание KBF 115 (E5.2)








































































































Результаты поиска

Содержание KBF 115 (E5.2)

Отзывы:

Похожие инструкции для KBF 115 (E5.2)

Бренды по названию

Популярные бренды

Binder KBF 115 (E5.2), Руководство по эксплуатации

Результаты поиска

Содержание KBF 115 (E5.2)

Отзывы:

Похожие инструкции для KBF 115 (E5.2)

Бренды по названию

Популярные бренды