Binder 9020-0423, Руководство по эксплуатации

Страница: 50 / 85

KB ECO / KB ECO-UL (E6.2) 12/2021 Page 50/85
16.2.4 Setting the subnet mask
Access to this function is possible only if manual IP address assignment has been selected (chap. 16.2.1)
Path: Normal display Settings Ethernet Subnet mask
Press the OK button to enable the setting.
The subnet mask entry is done in four steps, corresponding to the number sections: (1).(2).(3).(4)
Principle of entry:
•
Use the
OK button
to select the desired section of the subnet mask 1/4, 2/4, 3/4, 4/4 in the upper display
line
• Use the Arrow buttons to enter the value for the selected section of the subnet mask
For details please refer to the description of the similar procedure in chap. 16.2.3 “Assigning the IP ad-
dress”.
With the
arrow-down button you can now change to the enter the standard gateway.
With the Back button you can go back to the “ Ethernet ” submenu and, repeatedly pressing it, to Normal
display .
16.2.5 Setting the standard gateway
Access to this function is possible only if manual IP address assignment has been selected (chap. 16.2.1)
Path: Normal display Settings Ethernet Standard gateway
Press the OK button to enable the setting.
The standard gateway entry is done in four steps, corresponding to the number sections: (1).(2).(3).(4)
Principle of entry:
• Use the OK button to select the desired section of the standard gateway 1/4, 2/4, 3/4, 4/4 in the upper
display line
•
Use the
Arrow buttons
to enter the value for the selected section of the standard gateway
• For details please refer to the description of the similar procedure in chap. 16.2.3 “Assigning the IP
address”.
With the arrow-down button you can now change to the assign the DNS server address.
With the
Back button
you can go back to the “ Ethernet ” submenu and, repeatedly pressing it, to Normal
display
.
16.2.6 Assigning the DNS server address
Access to this function is possible if manual IP address assignment (chap. 16.2.1) or manual DNS server
address assignment (chap. 16.2.2) has been selected.
With manual IP address assignment:
Path: Normal display Settings Ethernet DNS server address
With manual DNS server address assignment:
Path:
Normal display Settings Ethernet DNS server address
Press the
OK button
to enable the setting.