Binder 9020-0423, Руководство по эксплуатации

Страница: 37 / 85

KB ECO / KB ECO-UL (E6.2) 12/2021 Page 37/85
11.2.1 Setting the safety controller mode
Required access level: “User”.
Path:
Normal display Setpoints Safety controller Mode
Press the OK button to enable the setting.
Setting the safety controller mode
The current setting flashes. Use the
arrow buttons to select between
LIMI (Limit) and OFFS (Offset).
Confirm the setting with the
OK button .
Mode
With the arrow-down button you proceed to setting the safety controller value (chap. 11.2.2)
With the Back button you can go back to the “ Safety controller ” submenu and, repeatedly pressing it, to
Normal display .
11.2.2 Setting the safety controller value
Required access level: “User”.
The desired safety controller mode must be selected first (chap. 11.2.1). Depending on the mode setting,
one of the following setting menus will appear.
Path:
Normal display Setpoints Safety controller Limit
or
Offset
Press the OK button to enable the setting.
Setting the safety controller value with “Limit” safety controller mode.
The current value flashes. Enter the desired limit value with the
arrow
buttons .
Confirm the entry with the OK button .
Limit
or
Setting the safety controller value with “Offset” safety controller mode.
The current value flashes. Enter the desired offset value with the
ar-
row buttons .
Confirm the entry with the
OK button
.
Offset
With the
Back button
you can go back to the “ Safety controller ” submenu and, repeatedly pressing it, to
Normal display .
Regularly check the settings of the safety controller mode and value.
Set the safety controller value by approx. 2 °C to 5 °C above the desired temperature set-
point.