1-74
D70ES
10.2 Operation
The MPP operating mode is defined during installation.
The operating modes are divided into two groups:
1) the user work from on the terminal, by pressing
to store and
transfer the weighing operation data;
2) the user work from the external terminal (e.g. PC) according to the
specific software.
In both operating modes, the progressive number associated to the weighing
operation can be viewed on the display after it has been stored.
The MPP identification code appears on the display, at the end of the MPP
operation, only if storage is requested by pressing the key.
The weighing terminal can signal a malfunction caused by the impossibility of
transferring or storing the data correctly. In that case follow the specified
instructions.
With MPP weighing from external terminal, the possibility of printing from
keyboard remains enabled.
10.3 Checking stored weight data
To check the stored weight data, press “2F” repeatedly until “CODMPP” is
selected.
The terminal displays the last stored CODMPP, press “EN” to select it or
enter the code to be consulted.
Press “2F” to display the stored data in sequence:
the net weight, tare (only if enabled), date and time associated with the
selected identification MPP code.
