1-37
D70ES
EN to modify.
The parameters that can be edited by pressing
, are:
CODE
Numeric code for generic use (6 digits).
The code remains set until an operator changes it.
TOTALS
(only if enabled)
To select: PARTIAL TOTAL, GENERAL TOTAL
and TOTAL PER CODE. After selecting the
TOTALS, press
to select the required total,
then press
to display the data .
Press
to display the individual values
relating to the total; in this phase it is possible to
press
to obtain the printout or
to reset.
The following data is reported in the partial total:
date - time - weighing number
– tare total – net
total and piece total (if piece func.)
The following data is reported in the general total:
date - time
– weighing number – tare total – net
total and piece total (if Piece func.)
The following data is reported in the total by code:
Date - time
– code -- weighing number – tare total
– net total and piece total (if Piece func.)
In case of double weighing operation the tare
values are omitted.
After printing a total, D70ES displays the message
“Azzert”, pressing
resets the total, pressing
