Bilanciai D70E, Руководство по эксплуатации и обслуживанию

Страница: 56 / 88

1-56
D70E
parity EVEN
2 stop bits
speed 4800 baud
Characters <s1>, <s2>, <s3>, <s4> are ASCII characters that must be
interpreted as hexadecimal values. Each character represents 4 bits of
different significance; for example, the incoming ASCII character "A" must
be interpreted as the hexadecimal digit "A";
1 0 1
bit3 bit2 bit1
0
bit0
When a bit assumes the value "1" the corresponding signal is "true"; the
meaning of the signals is as follows:
<s1> bit 0 minimum weight signal
bit 1 tare locked signal
bit 2 tare preset (1)/self-weighed (0)
entered signal
bit 3 centre zero signal
<s2> bit 0
LSB weighing extension signal (ME only)
bit 1 weight stable signal
bit 2 overload signal
bit 3
MSB weighing extension signal (ME only)
<s3> bit 0 tare entered signal
bit 1 tare locked cancelled signal (ME only)
bit 2 weight not valid
bit 3 printing in progress
<s4> bit 0 type approved instrument
bit 1 converter fault
bit 2 scale configuration parameter error
bit 3 not utilised