Bilanciai D70E, Руководство по эксплуатации и обслуживанию

Страница: 24 / 88

1-24
D70E
WARNING
Do not route the terminal connection cables alongside power
cables as these could cause disturbances that interfere with the
correct operation of the terminal. Only use the connection cable
supplied with the terminal. If the cable supplied is too short, do
not attach an extension lead but contact the Manufacturer.
3.2 Connection of the terminal to the platform scale
The terminal is normally supplied with a pre-wired cable for connection to
the platform scale. The female connector on this cable should be plugged
into the male 9-pin connector (JBIL) on the rear of the terminal (see point 4
Figure 3.1 on page 1-23).
WARNING
The cable screen should always be connected to the metal cap
of the 9-pin connector. Do not route the scale connection cable
alongside power cables.