Bilanciai D70E, Руководство по эксплуатации и обслуживанию

Страница: 84 / 88

D70E
1-84
NC.RIGA Parameter for setting number of characters per
line. Set 0 to maintain default setting.
LF.ESP Parameter to set number of line feeds for correct
ejection of a bill. Set 0 to maintain default setting.
CUTTER This activations operation of the cutter at the end
of a print.
TOTAL
Total cutting performed at end of print.
PARZIA
Partial cutting performed at end of print.
NO
Cutting not performed.
11.4.4 Submenu COM.ETH
This sub-menu contains parameters concerning the Ethernet port.
PORT Number of port
TIPE This parameter allows for selection of string:
ESTESA, CB, NO
TEMP This parameter establishes the frequency at
which the selected string is transmitted: RICH,
CONT and NO
TIME.TH This parameter inserts an interval between two
transmissions (in hundredths of a second).