BIKESTAR City, Руководство по сборке

Страница: 8 / 27

8
fig. 1
c) Front wheel for thru-axle
Remove the two plastic protective covers on the right and left of the hub, in the cen-
tre of the front wheel. A hollow axis with 12, 15 or 20 mm internal diameter is now
visible.
(fig. 1)
This is where the mounting axis is mounted in the next step.
fig. 2
fig. 3
The fork should then be prepared for the installation of the front wheel. For fork and
front wheel for pin-axle mounting (12, 15 or 20 mm diameter), the axle is mounted in
the fork end for transport.
(fig. 2)
It must now be completely unscrewed and put aside ready for use for the subse-
quent assembly.
(fig. 3)
Front Wheel Assembly - Thru-axle