BIKESTAR City, Руководство по сборке

Страница: 20 / 27

20
3.3 Place the handlebars in position
fig. 1
fig. 2
Loosen the screws at the handlebar / stem connection slightly. (fig.1)
Turn the handlebars to a comfortable position for you. Make sure that the handlebar
remains positioned centrally in the stem.
(fig. 2)
Tighten the handlebars evenly with the
appropriate Allen key on your minitool by
alternately tightening the pre-fastening
bolts.
(fig. 3-6)
fig. 3
fig. 5
fig. 4
fig. 6
Ensure uniform tightening torque for all pre-clamp bolts! The clearance of the stem clamp must be identical; otherwise there is
a risk of a serious material defect!
High clamping forces are not suitable here. The lever of the small minitool and medium hand forces are sufficient. It is best to
use a suitable torque wrench and pay close attention to the Newton meter indication for the handlebar clamp bolts of the stem
manufacturer.
Adjustment of handlebar/stem - Place the handlebars in position
3 2
4 1