BIKESTAR City, Руководство по сборке

Страница: 21 / 27

21 Adjustment of handlebar/stem - Installing the dismantled handlebars in the stem
3.4 Installing the dismantled handlebars in the stem
fig. 1
fig. 2 fig. 3
For individual bicycle models, it is necessary to separate the handlebar from the stem
for safe transportation. In this case, the stem and headset are already set correctly.
You only have to mount the handlebars in the stem.
(fig. 1)
Unscrew all the screws on the handlebar
clamp of the stem and remove the front
part of the handlebar clamp.
(fig. 2-3)
fig. 4
Position the handlebars exactly in the middle of the stem clamp and reassemble the
removed part of the stem clamp.
(fig. 4)
Turn the handlebars to an individually comfortable position. Make sure that the
handlebar remains positioned centrally in the stem.
Tighten the handlebars evenly with the
appropriate Allen key on your minitool by
alternately tightening the pre-fastening
bolts.
(fig. 5-8)
fig. 5
fig. 7
fig. 6
fig. 8
Ensure uniform tightening torque for all pre-clamp bolts! The clearance of the stem clamp must be identical; otherwise there is
a risk of a serious material defect!
High clamping forces are not desired here. The lever of the small minitool and medium hand forces are sufficient. It is best to
use a suitable torque wrench and pay close attention to the Newton meter indication for the handlebar clamp bolts of the stem
manufacturer.
3 2
4 1