BIKESTAR City, Руководство по сборке

Страница: 10 / 27

10
c) Rim brake: Road bike brake – Opening the brake
In the case of bikes with road bike bra-
kes, the brake cable must be released to
mount the front wheel. This is the only
way to fit the assembled and air-filled
tyre through the brake system. No screw
must be loosened.
A lever is located on the lower brake arm
for tool-free relaxation and tensioning
of the brake cable. This must be moved
from the closed position (bottom) to the
open position (top).
(fig. 1-2)
fig. 2 fig. 1
The brake is now suspended and will allow the front wheel to be fitted with an air-filled tyre.
d) Rim brake: Hydraulic Magura
On bikes with hydraulic rim brakes, the brake must be unhooked to mount the front wheel. This is the only way to fit the assem-
bled and air-filled tyre through the brake system. This does not require the loosening of any screws.
On the left brake body there is a tool-free
quick release fastener. Open the quick
release fastener labelled „Close“ by tilting
the lever downwards.
(fig. 3-4)
fig. 4 fig. 3
fig. 5
Pull the entire left brake body from the brake base of the fork. Be careful not to bend
or damage the hydraulic brake cable.
(fig. 5)
The hydraulic rim brake is now suspended and allows the front wheel to be
fitted with an air-filled tyre.
e) Roller brake
As with the disc brake, there is no need to unhitch the roller brake when installing the front wheel. The brake cable is already
suspended. A transport safety device must not be considered.
Front Wheel Assembly - Preparing the brake