BIKESTAR City, Руководство по сборке

Страница: 5 / 27

5 Front Wheel Assembly - Preparing the front wheel and fork - Quick release
After unpacking all the components, the front wheel should be installed to place the new bike on its "feet“ for all further work. So
that the front wheel can be mounted correctly into the fork, several steps must first be taken on the front wheel, fork and brakes.
Below you will find the necessary instructions needed for your specific brake and front wheel type.
2.1 Preparing the front wheel and fork
Please find and follow the appropriate section for your model:
2. Front wheel assembly
fig. 3
fig. 2
fig. 4
fig. 1
A
B
Remove the quick release from the accessory package, loosen the spring clip (A) and
remove the one spiral spring (B) . (fig. 2)
a) Quick-release front wheel & quick release:
Remove the protective plastic cover on the right and left of the hub at the centre of
the front wheel.
(fig. 1)
Insert the quick release through the axle
of the front wheel.
(fig. 3)
Put the spiral spring back on the quick
release.
(fig. 4)
The thin end of the spiral spring should always point towards the center of the hub.
fig. 5
Screw the clamping nut on slightly (fig. 5)
The front wheel is now properly prepared.