BIKESTAR City, Руководство по сборке

Страница: 7 / 27

7
fig. 1
fig. 2 fig. 3
b) Front wheel screw axle with axle nuts
Remove the two plastic protective covers on the left and right of the hub, in the cen-
tre of the front wheel.
(fig. 1)
Under the cover, the hub axle is now
visible. You will see the hub axle without
a hole, with an external thread, as well as
an axle nut and a washer on each side.
Loosen the two axle nuts on the hub
axle using a 15 mm open-end spanner
until there is a 5-10 mm gap between
the hub and the nut.
(fig. 2-3)
Please ensure that a washer is installed on each side.
fig. 4
In order to prepare the fork, the transport safety device should then be removed
from the fork end. In the conventional screw axle system, the transport safety device
only protects the fork when the front wheel is removed. It is not required to mount
the wheel.
(fig. 4)
Front Wheel Assembly - Screw axle with axle nuts