13
fig. 1
fig. 2
fig. 3
b) Screw axle
When the front wheel is in position, make sure that the washers are located on both
sides between the fork end and the axle nut.
(fig. 1)
Turn the axle nuts on both sides
by hand.
Use the 15mm wrench to screw the
axle nuts, alternating between right
and left, until they are evenly and firmly
fixed. This prevents slipping of the front
wheel.
(fig. 2-3)
fig. 4
If your bicycle has a hub dynamo, then plug the lighting connector on the right
side of the fork to the hub dynamo slot of the front wheel. (fig. 4)
Front Wheel Assembly - Fitting the front wheel - Quick release
Содержание City
Страница 1: ...Assembly Instructions for City Bicycles ...