12
2.4 Fitting the front wheel
fig. 1
fig. 2
The quick release lever must be turned completely. The resistance of the closing movement of the quick release lever must in-
crease significantly after approximately half of the lever travel. Otherwise the preload must be adjusted using the clamping nut on
the opposite side.
a) Quick release
Hand-screw the clamping nut on the
quick release clamp against the lever
until the open quick release tensioner
has approx. 1-2 mm play. Move the quick
release lever round 180°. (From position
"Open“ to position "Close")
(fig. 1-2)
fig. 3
If the quick clamp has been closed correctly, the word "Close“ can now be
read on the outside.(fig. 3)
Front Wheel Assembly - Fitting the front wheel - Quick release
Содержание City
Страница 1: ...Assembly Instructions for City Bicycles ...
