BIANCHI VENDING SIRIO FRESH BREW, Руководство пользователя

Страница: 12 / 45

12
SIRIO
4.0 HANDLING AN AUTOMATIC VENDING
MACHINE
4.1 Handling and transport (Fig. 4.1)
The transport of the distributor must be effected by competent
personnel.
The distributor is delivered on a pallet; for the shifting use a
trolley and move it slowly in order to avoid capsizing or dangerous
movements.
Avoid:
- lifting the distributor with ropes or presses
- dragging the distributor
- overturning or laying the distributor down during transport
- jolting the distributor
Ensure that the distributor is not
- knocked
- weighed down with other packs on the top
- exposed to either rain or freezing conditions or heat sources
- kept in damp places
The construction company is not liable for any damage which
may be caused for the partial or complete non-observance of the
warning notices indicated above.
4.2 Stocking
For eventual stocking, avoid laying several machines over each
other, maintain it in vertical position, in dry places with
temperatures not inferior to 1°C (Fig. 4.2).
4.3 Packing
The distributor is protected with polystyrene or card-board angles
and by a transparent film in polypropylene (Fig. 4.2).
The automatic distributor will be delivered packed, assuring both
a mechanical protection and protection against damages from
the external environment.
Labels are applied on the package indicating:
l manoeuvre with care
l don’t turn upside-down
l protect from the rain
l do not stack
l protect from sources of heat
l not resistant to knocks
l type of distributor and serial number.
Fig. 4.1
4.4 Receipt
Upon receipt of the automatic distributor you need to check that
the same has not suffered damages during the transport.
If damages of any nature are noticed place a claim with the
forwarder immediately.
On delivery the packaging must be integral, and therefore
must not :
- Show signs of dents, bumps, deformations or damages of the
external packaging
- Show signs of damp or signs that could lead to suppose that
the packing has been exposed to rain, cold or heat
- show signs of tampering.
4.5 Unpacking
- Free the distributor from the packaging , cutting the protective
film in which it is wrapped, along one of the protection angles
(Fig. 4.3).
- Remove the distributor from transport pallet, unscrewing the
screws (A) that block the fixing cross staff heads to the pallet
(Fig. 4.4).
Fig. 4.2
Fig. 4.3
Fig. 4.4
155 kg