BIANCHI VENDING SIRIO FRESH BREW, Руководство пользователя

Страница: 17 / 45

17
SIRIO
6.5 Installation
6.5.1 Filling the water circuit
The machine fills the water circuit automatically.
On switching on the distributor a electro-valve provides consent
for filling of the boiler.
It is good practice to undertake the washing of all units, each
time the machine is switched on again, by pressing the button
shown in Fig. 6.13.
Before connecting the power supply, ensure that the distributor
has been connected to the water mains and that the water tap
has been turned on.
Fig. 6.13
6.5.2 Cleaning of the parts in contact with food substances
With distributor on clean all the mixers pressing the buttons as in
the operating instructions, in order to remove all traces of dirt
from the boiler.
- Wash your hands thoroughly.
- Prepare an anti-bacterial cleaning solution with a chlorine base
(products that can be purchased in pharmacies) carefully
following the indications on the product instruction labels.
- Remove all the product containers from the distributor (Fig.
6.14).
- Remove the lids from the product containers covers and product
chutes (Fig. 6.15). Dip then in the solution previously prepared.
- Remove all the powder chutes, water funnels, mixing chambers
and whippers and silicone tubes and dip these parts in the
prepared solution (Fig. 6.16).
- With a cloth soaked with the solution clean the whipper base
(Fig. 6.17).
- The parts must soak in the solution for the time indicated on
the solutions’ instruction label.
- Recover all the parts, rinse them abundantly, dry them perfectly
and proceed with the re-assembly in the distributor.
To ensure even greater safety, on re-assembling the re-
lative parts, it is a good idea to undertake some automatic
washing cycle in order to eliminate any eventual residues.
LATTE
MILK
LAIT
MILCH
Fig. 6.14
Fig. 6.15
Fig. 6.16
Fig. 6.17