D811508_02
MITTO 2 - MITTO 4
Transmitter with 2 or 4 keys, which can be associated with a person
to control access through the access points. The codes transmitted
are detected by means of the RTD-CA receivers, which must be ap-
propriately configured to control opening of and passing through an
access point, starting from a defined set of transmitters.
COMPASS ISOCARD
Proximity card, which can be graphically personalised, and is cha-
racterised by an identification code which is associated with the card
holder. This card is detected by the Compass Reader proximity rea-
ders, and is enabled to control the transits of the person holding it.
COMPASS RING
Proximity key-holder containing an identification code associated
with the holder.
This device is detected by the Compass Reader proximity readers
and is enabled to control the transits of the person holding it.
USB PARALLEL
Activation key for Securbase Light/Plus.
It is available in two versions:
- USB
- PARALLEL (LPT1)
The Compass 485-Compass Reader proximity readers and the RTD-CA receivers are all connected in the RS 485 network for the physical creation of the
access control installation.
PC
Compass SC
(RS 232 / USB)
Local network (RS 485)
Identification device readers (Compass 485-Compass Reader or RTD-CA)
The Compass SC unit represents the core of each access control installation. All the components will be connected to Compass SC through the RS 485
network. This RS 485 network is to be appropriately and thoroughly completed, and the total maximum number of devices connected depends on the
installation size. For installations having to control a number of access points below 16, the Securbase Light software can be used. For installations having
to control a number of access points above 15, the Securbase Plus software must be used.
Securbase, Light or Plus version, is the software which manages an access control installation.
Each installation can be made up of a variable number of access point management devices, persons controlled, logic control units such as, for example,
groups of persons, protected zones, calendars and others.
The two Securbase Light and Securbase Plus versions are intended to manage installations having different characteristics. Moreover, in the case of Se-
curbase Plus, the ability to recognise and manage automatically a large number of different installations is fundamental, since it allows the configuration
and control of multiple installations.
INSTALLATION MANUAL
ENGLISH
SECURBASE LIGHT-PLUS -
17
Содержание SECURBASE LIGHT PLUS
Страница 74: ...D811508_02 74 SECURBASE LIGHT PLUS ...
Страница 75: ...D811508_02 SECURBASE LIGHT PLUS 75 ...
Страница 76: ......