Betafence Bekamatic SC 6000 Line, Руководство по установке

Страница: 2 / 28

Bekamatic SC pg. 2
Table of Contents.
1. Warnings
................................................................................................................................... 3
1.1. Warnings for installer and end user
.................................................................................. 3
1.2. Special points to note
............................................................................................................. 3
1.3. Safety rules for end user
....................................................................................................... 5
2. Guidelines for installation
.............................................................................................. 5
3. Guidelines for gate lifting
................................................................................................ 6
4. Foundations
............................................................................................................................. 6
4.1. Gates opening to the right
............................................................................. 8
4.2. Gates opening to the left
................................................................................. 9
5. Preparations before gate installation:
.................................................................. 10
5.1. Fixing requirements
................................................................................................. 10
5.2. Installation of the ground anchors:
.............................................................. 10
5.3. Preparing installation levels:
............................................................................. 11
6. Installation of the gate onto the ground anchors:
........................................... 12
7. Installation of the lock post onto the ground anchors:
........................................... 13
8. Alignment and levelling of the gate:
.................................................................... 13
9. Adjustment of the mechanical end stops:
.......................................................... 16
9.1. Adjustment of the front mechanical end buffering:
............................. 16
9.2. Adjustment of the rear mechanical end buffer: ...................................... 17
10. Motor height Adjustment:
............................................................................................. 18
11. Set-up of the end position:
.......................................................................................... 20
12. Power Supply:
...................................................................................................................... 20
13. Adjustment and testing of safety equipment:
.................................................... 21
13.1. Wireless transmission system for safety strip
........................................ 21
on the wing ......................................................................................................................................... 21
13.2. Safety strips:
................................................................................................................ 23
13.3. Photocells: ..................................................................................................................... 23
14. Different Set-up systems:
................................................................................... 25
14.1. Set-up for Bus-system: ......................................................................................... 25
14.2. Start the Self-Learning procedure
.................................................................. 26
15. Maintenance: ............................................................................................................................. 27
16. Revision:
.................................................................................................................................... 27