Betafence Bekamatic SC 6000 Line, Руководство по установке

Страница: 24 / 28

[H ie
Bekamatic SC pg. 24
r eingeben] [H ier eingeben] [H ier eingeben]
13.4. Remote controls:
13.4.1. Programming Remote control devices to the board:
- The gate controller has a two-channel receiver integrated into
the board. You can only program one transmitter with the
receiver using this direct method.
- To activate the receiver for Channel 1 push and hold button
+/R1 for > 5 secs, once the LED DL11 starts to flash release the
/R1.
- Take your 2-channel transmitter and push and hold both buttons
until the led on the top of the transmitter starts to flash.
Release both buttons.
- Choose now on your transmitter the button that you want to
program. Push this button until the led DL11 illuminates and
stays on.
Release the button.
- Push the programmed button twice in quick succession.
The second push sets the gate in motion.
- If this happens the programming was successful.
13.4.2. Programming a transmitter to another transmitter:
- Using the programmed transmitter (function tested).
- Push both buttons (2 to 3 secs.) until the LED on the top starts
to flash. Release both buttons. Transmitter is in programming
mode.