Berthold LB 9510, Руководство по эксплуатации

Страница: 27 / 79

LB 9510 Lumat 4 Operation with ICE
71450BA2 Rev. 00, 12/2020 Page 27 of 79
5.
The [Measuring Sequence Page] shows the sample and replicate se-
quence to be measured.
Click <Next>.
6.
Define [Print] settings.
Select the items by dragging from left to right.
[Page Header] file names
[Measurement Data] readings
[Statistics] measurement settings
For Kinetics you may select [All curves] and [Zoomed Curves] addi-
tionally to view the graphs.
Define
[page orientation] and [margins].
Check if [Automatic Print after Measurement] is required.
Click <Next>.
7.
Define [Export] settings.
Type your [Header] specific for this protocol.
Select the [Content] by dragging from left to right. The available items
may vary depending on the measurement type selected.
Example for Endpoint Single:
[Sample] sample information
[Read] readings
[Remarks] device status messages (flags, remarks)
[Statistics] measurement settings