Berthold Duo Xpert LB 478 MPLM, Руководство по эксплуатации

Страница: 46 / 136

7 Main Menu Device Setup LB 478 MPLM
46
56925-8BA2 Rev.00, 07/2019
7.2 Menu Access
Device Setup | Access
You can set the user rights via the user levels and assign passwords in the submenu
Access. After assigning a password the system is protected against unauthorized
manipulation of the parameters.
IMPORTANT
Make sure that the password is known to you before you select the "Basic"
access level and lock the device. The same applies if you set "Automatically log-
out".
If you do not know the password, you will not be able to unlock the device! If
in doubt, enter a new password with "Change Password".
1
2
3
4
5 Check box “Automatic logout”
Change
<Change password>
User level “Basic”
User level “Standard”
User level "Admin“
Fig. 22 Access
Automatic logout Activating the selection box (Fig. 22 item 1) au-
tomatically resets the access level Standard to
“Basic” when the system changes to the stand-
ard display after the timeout (chapter 7.3.1).
The following user levels are available to you:
User Level Basic
Select "Basic" to lock the device against un-
wanted manipulation. After the device has
been locked, it is still possible to read all data,
but changes to the data are no longer possible.
If "Basic" is already set, then the device is al-
ready in the locked state.
To unlock the device, select the access level
"Standard".
User Level Standard
If the device is in the "Standard" access level,
all parameters are accessible and can be
changed.