Berthold Duo Xpert LB 478 MPLM, Руководство по эксплуатации

Страница: 56 / 136

7 Main Menu Device Setup LB 478 MPLM
56
56925-8BA2 Rev.00, 07/2019
Network
Device Setup | Setup | System | Network
In the Network settings, you can make changes to the network settings. The infor-
mation can only be edited in the access level "Standard" (see chap. 7.2 Menu
Access). You can set the network address either manually or using DHCP (automatic
assignment). To do this, check the "DHCP active" in the selection field (Fig. 35,
item 1).
1
2
3
4 Check box "DHCP active"
IP address
Subnet mask
Standard gateway 5
6
7 DNS server
MAC address
Button
<Apply>
Fig. 35 Network Settings
IMPORTANT
The PC and the LB 478 have to be in the same IP subnet.
u
In the event of an automatic assignment of the IP address by a DHCP server,
you can only look at the given IP address. A modification of the IP address is
not possible. On this side, you can also read the MAC address of the device
(Fig. 35, item 6).
Manual settings
1. Click on the text field (Fig. 35, item 2 - 5) to open the input field.
2. Enter the appropriate network addresses.
3. Confirm with the Enter key.
4. Click on <Apply> (Fig. 35, item 7) to adopt the network settings.
IMPORTANT
All settings performed must be confirmed by clicking on <Apply> so that the
settings become real.