BERTHOLD TECHNOLOGIES LB 567, Руководство пользователя

Страница: 32 / 186

Chapter 3. System Description
32 MicroPolar 2 (++) LB 567
Version 2: It consists of a single HF-cable whose ends are ter-
minated by an HF-connector (N-type). Available lengths: 0.5, 1,
1.5, 2, 2.5, 3, 3.5 and 4 m (see Figure 3-17).
For the horn and spiral antennas (conveyor belt and chute
application)
, only the HF cable is used. One cable each connects
the evaluation unit with the antenna. A third cable serves as ref-
erence line; its cable length corresponds to the sum of the lengths
of both antenna cables.
Figure 3-17:
HF cable
Lengths 0.5 to 4 m
ø
10 mm
19 mm wrench
For further technical data, see chapter 6.5 Technical Data HF-
Cable .
During assembly, ensure that the end of the corrugated tube is bent
down on the probe side. By doing so, the ingress of fluids into the
corrugated tube is prevented.