BERTHOLD TECHNOLOGIES LB 567, Руководство пользователя

Страница: 138 / 186

Chapter 5. Configuration
42
MicroPolar 2 (++) LB 567
Example:
Select the respective entry, edit and store it.
DATE
Push
DEL to delete the entry and then enter the new date.
Push .. √ .. to confirm and store the changed date.
TIP
The colon for the time input (e.g. 13:25) is invoked by
pushing the button [
.
].
5.1.2 Measurement
You have to check the settings on this display and adapt them
to the measurement conditions.
Averaging over 60 measurements is a good choice as a rule.
5.1.3 Plausibility
The
process limits
need to be adjusted. Allow exceeding of
the measuring by ± 5% absolute.
Example: The measuring range is 65-95% TS. Enter 60-100%
TS as process limit.
The process limits are independent of the current output limits.
PHASENMESSUNG
In the normal measurement mode
Sigma
is between 0 and
500. Therefore, Sigma
max
= 500 is a good choice for most ap-
plications. Higher Sigma values usually indicate a fault, such
as continuous air bubbles which have to be eliminated.
1 | - | General Data | 07.05 – 13:25
Date 07.05.2004
Time 13:25
Tag
⌂◄ ▲ ▼ ►
1 | - | General Data | 07.05 – 13:25
Date
07.05.2015
ESC
.. ? ..
DEL .. √ ..
1 | - | Measurement | 07.05 – 13:25
Meas. Mode Continuous
Start Mode Keypad
Averaging 60
Reset averaging no
Current Out at stop
⌂◄ ▲ ▼ ►
1 | - | Plausibility | 07.05 – 13:25
Process limits
Phase Measure
⌂◄ ▲ ▼ ►
1 | - |Phase Measure| 07.05 – 13:25
Sigma max 500.00
⌂◄ ▲ ▼ ►