PROGRAMMING
This Panel can be programmed via computer or keypad. The
Omnia - Academy40
application ----from the optional
Security Suite
software----provides a trouble-free way of programming the Panel. This chapter holds in-detail in-
formation on the system parameters, and should be referred to when programming via keypad.
+
Refer to the
Security Suite
manual for further information on the
Omnia - Academy40
application.
Programming via
computer
Step 1
Install
Security Suite
as per the instructions in the
Security Suite
manual.
Step 2
Start the Omnia - Academy40 application.
Step 3
Select the Panel Type (refer to
Customer data
paragraph) and Firmware release (refer to
Options
paragraph in
the
Security Suite
manual).
Step 4
Program the parameters (refer to the relevant paragraph).
Step 5
Program as per
On-site Programming via computer
or
Remote Programming via computer
(refer to the rele-
vant paragraph).
The programmed parameters can be saved on a computer, or floppy disk, and downloaded on-site or via tele-
phone to the Panel (refer to
the
Save
and
Open Customer
paragraphs in the
Security Suite
manual).
The parameters of each feature are grouped together in pages. The pages in this chapter are as per page order in
the application.
PROGRAMMING
29
Содержание academy 40
Страница 1: ...INSTALLATION MANUAL BS EN ISO 9001...