Bentel academy 40, Руководство по установке

Страница: 20 / 80

Snatch
microswitch
Install the Snatch microswitch
15
(optional), as per the instructions below (see fig. 12).
1
Use an adequate wire length with a female connector at one end (pitch 2.54 mm), and the other end loose.
2
Solder the loose end of the wire to terminals
C
and
NO
of the Snatch microswitch
15
.
3
Attach the Snatch microswitch to the back box.
+
The release lever must be held in place by the plastic pin on the Snatch microswitch bracket (
14
)
4
Remove the jumper from the connector (
17
) then connect the Snatch microswitch to the connector.
Maximum Configuration
Figure 12 shows the maximum configuration of the Panel.
PART DESCRIPTION
77 Speaker
79 Voltage supply
80
Battery 12 V - 17 Ah max.
81 Voice board
82
Main board
83 Microphone board
NC
NO
C
83 17
81
82
15 14
79
77
80
Figure 12
Maximum configuration of the Panel
20
Expandable Multifunction Control Panel
Academy40