Benstone Fieldpaq, Руководство пользователя

Страница: 31 / 222

P
ag
e
30
Definition of exponential function:
x(t) = log (-Bt)
Definition of exponential factor X: X = log (-Bt) at t = T, where T is the length of
the time block.
Actually X is the attenuation rate of the exponential window at the end of the time
block. This should be a real number between 0 and 1.
Channel ID : Enter a value between 0 and 999.
Direction : You can select one of the
directions from a pull-down menu.
+X, -X, +Y, -Y, +Z, -Z, +R, -R, +T, -T, +P, -P.
The point ID’s and direction labels are used
for modal or ODS testing work. The point
ID’s will be stored in the data file for
identifying the points.
Auto Advance : ON/OFF: Auto advance is a
feature that is useful for taking many data
points. If you have auto advance turned on,
then you can assign an advance number after
you save the data file. Each channel is
independent of each other, so you can auto
advance only the channels you wish to advance.
Advance Number : Advances the number of Channel ID after you save the file.
Local Soft Key Menu : Return, Assign Single, Assign All
Return : Selecting the Return function returns you to the Setup menu.
Selecting return again returns you to the live display.
Assign Single: This feature speeds up the entry requirements for channel setup.
Assign single will assign that parameter selected for the column you are in.
Assign All: This feature will assign all columns of data to be the same data
selected for that channel.