Operation
47
Hiding the image
In order to draw the audience's full attention to the presenter, you can use
ECO BLANK
on the projector or remote control to hide the screen image. Press any key on the
projector or remote control to restore the image. The word '
BLANK
' appears at the
lower right corner of the screen while the image is hidden.
•
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Freezing the image
Press
FREEZE
on the remote control to freeze the image. The word '
FREEZE
' will
display in the upper left corner of the screen.
To release the function, press any key on the
projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen on screen.
Shutting down the projector
1.
To turn the projector off, press POWER OFF
on the remote control to turn projector off
directly. Or you can press
POWER
on
the projector and a warning message appears.
Press
POWER
again.
2.
Once the cooling process finishes, the
POWER indicator light
is a steady orange
and fans stop.
3.
Disconnect the power cord from the wall socket if the projector will not be used in
an extended period of time.
•
To protect the lamp, the projector will not respond to any commands during the cooling
process.
•
To shorten the cooling time, you can also activate the Quick Cooling function. See
"Quick
Cooling" on page 56
for details.
•
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start
the projector, the fans will run for a few minutes to cool down. Press POWER again to start
the projector after the fans stop and the POWER indicator light turns orange.
•
Lamp life results will vary depending on environmental conditions, and usage.
BenQ W1300.book Page 47 Thursday, August 29, 2013 2:07 PM
