BenQ W1300, Руководство пользователя

Страница: 33 / 74

Operation 33
If you forget the password
If the password function is activated, you will be asked
to enter the five-digit password every time you turn
on the projector. If you enter the wrong password, the
password error message as pictured to the right
displays lasting for three seconds, and the message
'INPUT PASSWORD' follows. You can retry by
entering another five-digit password, or if you did not
record the password in this manual, and you absolutely do not remember it, you can use
the password recall procedure. See "Entering the password recall procedure" on page 33
for details.
If you enter an incorrect password 5 times in succession, the projector will automatically
shut down in a short time.
Entering the password recall procedure
1. Press and hold AUTO on the projector or
remote control for 3 seconds. The
projector will display a coded number on
the screen.
2. Write down the number and turn off your
projector.
3. Seek help from the local BenQ service
center to decode the number. You may be
required to provide proof of purchase
documentation to verify that you are an
authorized user of the projector.
Changing the password
1. Open the OSD menu and go to the System Setup: Advanced > Password >
Change password menu.
2. Press MODE/ENTER . The message 'INPUT CURRENT PASSWORD' displays.
3. Enter the old password.
• If the password is correct, another message
'INPUT NEW PASSWORD'
displays.
• If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'INPUT CURRENT PASSWORD' displays for
your retry. You can press MENU/EXIT to cancel the change or try another
password.
4. Enter a new password.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
5. Confirm the new password by re-entering the new password.
6. You have successfully assigned a new password to the projector. Remember to enter
the new password next time the projector is started.
Password Error
Please Try again.
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
12345678
RECALL PASSWORD
Back
MENU
BenQ W1300.book Page 33 Thursday, August 29, 2013 2:07 PM