Positioning your projector
16
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable
power outlet, as well as the location and distance between the projector and the rest of
your equipment.
*To set the projector position:
1.
Press
MENU/EXIT
on thr projector or remote control and then press
/
until
the system
System Setup: Basic
menu is highlighted.
2.
Press /
to
highlight
Projector
and press
/
until the correct position is
selected.
1.
Front
Select this location with the projector
placed on a table in front of the screen.
This is the most common way to position
the projector for quick setup and
portability.
2.
Rear
Select this location with the projector
placed on a table behind the screen.
Note that a special rear projection screen
is required.
*Set
Rear
after you turn the projector
on.
3.
Front Ceiling
Select this location with the projector
suspended upside-down from the ceiling
in front of the screen.
Purchase the BenQ Projector Ceiling
Mounting Kit from your dealer to mount
your projector on the ceiling.
*Set
Front Ceiling
after you turn the
projector on.
4.
Rear Ceiling
Select this location with the projector
suspended upside-down from the ceiling
behind the screen.
Note that a special rear projection screen
and the BenQ Projector Ceiling Mounting
Kit are required for this installation
location.
*Set
Rear Ceiling
after you turn the
projector on.
BenQ W1300.book Page 16 Thursday, August 29, 2013 2:07 PM
