Operation
34
7.
To leave the OSD menu, press
MENU/EXIT.
Disabling the password function
To disable password protection, go back to the
System Setup: Advanced
>
Password
> Power on Lock
menu after opening the OSD menu system. Select
Off
by pressing /
.
The message
'INPUT PASSWORD'
displays. Enter the current password.
i. If the password is correct, the OSD menu returns to the
Password
page with
Off
show in the row of
Power on Lock
. You will not have to enter the
password next time you turn on the projector.
ii. If the password is incorrect, the password error message displays lasting for
three seconds, and the message
'INPUT PASSWORD'
displays for your retry.
You can press
MENU/EXIT
to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should you
ever need to re-activate the password function by entering the old password.
BenQ W1300.book Page 34 Thursday, August 29, 2013 2:07 PM