Operation
38
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available
when
User 1
or
User 2
mode is selected. You can make adjustments to these functions
based on your needs.
Adjusting Brightness
Highlight
Brightness
in the
Picture
menu and adjust the values by pressing
/
on the
projector or remote control.
The higher the value, the brighter the image. And
lower the setting, darker the image. Adjust this control
so the black areas of the image appear just as black and
that detail in the dark areas is visible.
Adjusting Contrast
Highlight
Contrast
in the
Picture
menu and adjust the values by pressing
/
on the
projector or remote control.
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the
Brightness
setting to suit your selected
input and viewing environment.
Adjusting Color
Highlight
Color
in the
Picture
menu and adjust the values by pressing
/
on the
projector or remote control.
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting Tint
Highlight
Tint
in the
Picture
menu and adjust the values by pressing
/
on the
projector or remote control.
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes.
Adjusting Sharpness
Highlight
Sharpness
in the
Picture
menu and adjust the values by pressing
/
on the
projector or remote control.
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
+50
+30
+7
0
+30
-3
BenQ W1300.book Page 38 Thursday, August 29, 2013 2:07 PM
