Beninca BULL 1224 TURBO Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 76

background image

67

BULL 1224 TURBO

SAFETY MEASURES

•  Do not stand within the gate movement area.
•  Children must not play with controls and near the gate.
•  In the event of malfunctions, do not attempt to repair the failure but contact the specialised personnel.

MANUAL AND EMERGENCY MANOEUVRE

In the event of power failure or malfunction, to manually operate the gate proceed as follows:
•  After inserting the customized key C, turn it anti-clockwise and pull the lever L.
•  The geared motor is unlocked and the gate can be moved by hand.
•  To return to the normal operating mode, close the lever L again and manually activate the gate until it is geared.

MAINTENANCE

• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These operations must be carried

out by qualified personnel only.

• Periodically check the efficiency of the safety devices and other parts of the system that could generate hazards due to wear and

tear.

• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other components of the

automation system work properly. Wear and tear of some components could cause dangers.

• Keep the maintenance record that must be handed to you by the installer, and comply with the maintenance schedule.
• Unplug the system from the power source when servicing or cleaning the parts.
• Regularly check that all parts of the automation system are firmly secured and check for signs of wear or damage to cables, springs

and fastening screws. Do not use the automation system if the same requires repairs or maintenance.

WASTE DISPOSAL

As indicated by the symbol shown, it is forbidden to dispose this product as normal urban waste as some parts might
be harmful for environment and human health, if they are disposed of incorrectly. Therefore, the device should be dis-
posed in special collection platforms or given back to the reseller if a new and similar device is purchased. An incorrect
disposal of the device will result in fines applied to the user, as provided for by regulations in force.

USER’S HANDBOOK

C

L

«
...
65
66
67
68
69
...
»

Содержание BULL 1224 TURBO













































































Отзывы:

Нет отзывов

Похожие инструкции для BULL 1224 TURBO

Бренд: BAFANG Страницы: 12

Бренд: MJ Research Страницы: 143

Бренд: Yanmar Страницы: 52

Бренд: IMS Страницы: 6

Бренд: Petter Страницы: 58

Бренд: Habasit Страницы: 20

Бренд: MerCruiser Страницы: 118

Sterndrive 4.3L TKS

Бренд: MerCruiser Страницы: 130

Бренд: MerCruiser Страницы: 135

MOTOR ELITE-i BOX 45 Series

Бренд: gaviota Страницы: 24

BEVELMASTER 204B

Бренд: TRI tool Страницы: 46

Бренд: Honda Страницы: 88

Z.28R Spec.3 Pullstart

Бренд: LRP electronic Страницы: 3

Бренд: Krick Страницы: 12

Бренд: STEYR MOTORS Страницы: 134

Marine Engine 2012 Series

Бренд: STEYR MOTORS Страницы: 274

ZA top SM160.30B/S

Бренд: ZIEHL-ABEGG Страницы: 72

Бренд: FAAC Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды