89000004-200
KA 310 STC Installation Manual
Rev 0
Page 2-8
© Honeywell International Inc. Do not copy without express permission of Honeywell.
2.6
Pre-Installation Checklist
Before beginning a KA 310 installation, it is important to ensure the aircraft meets the pre-requisites for
the installation of the KA 310 under this STC. The following checklist is provided to help the installer
determine the necessary requirements that must be met before beginning installation of the KA 310 in a
specific aircraft. Ensure each of the items outlined are completed as necessary before beginning the
modification.
Table 2-2: Pre-Installation Checklist
Item
Reference
Com
p
le
te
KI 300 installed as the primary flight display
KI 300 TSO IM (PN 89000004-
101)
Installation/operational limitations reviewed
to ensure no adverse impact to the
installation
Section 2.8 and Section 3.5
Aircraft electrical system is sufficient for KA
310
Section 4.5
Aircraft weight and balance with KA 310 is
within aircraft limits.
Section 4.2
Acceptable mounting provision have been
identified.
Section 3.5.1
2.7
Technical Specifications
Table 2-3: KA 310 Specification
Characteristic
Specification
Dimensions
5.81 inches x 5.25 inches x 1.25 inches (L x W x H)
(148 mm x 133 mm x 32 mm)
Mounting Information
Vertically or horizontally with four screws
Weight
1.07 lbs. (0.48 kg)
Current Draw
Typical (28VDC): 0.145 A, Max (28VDC): 0.200 A
Typical (14VDC): 0.245 A, Max (14VDC): 0.380 A
Operating Voltage
+9.0 to 32.2 VDC
Circuit Breaker
2.0 Amps
Software
RTCA/DO-178C Level C
Hardware
NA
Connectors
DB-44, DB-9
REF:
RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS
UP793797