Belling 83180302, Руководство пользователя

Страница: 6 / 44

IGnItIon PRoceDURe
Prior to ignition:
Hotplate burner(s)
, position correctly
sized, flat bottomed pan(s) directly onto
the pan support above the selected
burner(s).
Wok burner (if fitted)
a) Position a flat bottomed wok or a cor -
rectly sized, flat bottomed pan directly
onto the pan support above the wok
burner.
b) Position the provided wok stand direct-
ly onto the pan support above the wok
burner, then position a round bottomed
wok directly onto the stand.
Grill burner
Open the grill door and position the grill
pan into the selected runner position.
Remove the pan handle and leave the
door open.
oven burner(s)
Ensure the oven shelves are positioned
into the selected runner positions. Close
the door(s).
For main oven fanned gas cooking, push
the convection fan button , prior to
preheating for 15 minutes.
correct procedure for ignition of all
burners on this appliance.
Manual ignition (if applicable)
• Push in and keep depressed the igni-
tion button . Sparking to all gas
burners will commence.
• Push in and turn the selected gas
burner control knob to the full flame
symbol or for oven burners, the
maximum temperature setting. Keep
the control knob depressed.
• As soon as the selected burner ig-
nites release the ignition button.
• Continue to hold the control knob in
for up to 15 seconds then release.
• If the burner fails to ignite within this
time, release the control knob and
wait 1 minute before attempting to
re-ignite.
Automatic ignition (if applicable)
• Push in and turn the selected gas
burner control knob to the full flame
symbol . Keep the control knob
depressed. Sparking to the selected
burner will commence automatically.
Sparking will cease automatically
once the flame is established.
• Continue to hold the control knob in
for up to 15 seconds then release.
• If the burner fails to ignite within this
time, release the control knob and
wait 1 minute before attempting to
re-ignite.
In the event of a power failure, or the
ignition not working, then a lighted match
or taper can be used to ignite the burner.